Waldorf MicroWave XT Bedienungsanleitung PDF herunterladen (Seite 26)

The picture shows five page groups, divided into the sections Sound, Multi, Instrument

and Global. Each group has a select key 햷…햻 and an activation LED below.

• The Sound parameters refer to a Sound program. If you are in Sound mode, you

will edit the currently played program. If you are in Multi mode, the Sound

program for the currently selected Instrument will be edited.

• The Multi parameters refer to a Multi program. They determine the common setting

for all instruments in the Multi program. Obviously, you can access these

parameters only when the MicroWave II/XT/XTk is in Multi mode.

• The Instrument parameters also refer to a Multi program. They determine the

individual setting of each instrument in the Multi program. Again, you have to be

in Multi mode to access these parameters.

• The Global parameters provide the basic settings of the MicroWave II/XT/XTk,

valid for all programs.

☞ This is how you access a specific parameter:

1. Locate the page group on the front panel and press the corresponding select key

햷…햻 below.

2. The display changes to a set of 4 parameters from the first page of the selected

group. For example, if you press the leftmost select button 햻 the parameters for

Oscillator 1 will be shown:

For a few seconds the page name is shown in the upper right corner of the display.

In our given example

[Osc1 1] will be displayed for "Oscillator 1 Page 1". Some

units of the MicroWave II/XT/XTk, e.g. the oscillators, have several parameter pages

which are indexed by a page number.

When single mode is selected, you can only play and edit sound programs. If you try to

access a Multi mode parameter, you will get an error message in the upper right corner:

 If you did some editing before the MicroWave II/XT/XTk was last powered on, the

display may show a different page than the first after pressing the select key. This is an

important feature: The MicroWave II/XT/XTk memorizes the last selected page to

speed up editing. When you re-enter the page group, you will find yourself where

you had left it last time.

3. Use the page dial 햴 to scroll through the page group:

Play Sound A001[Multi Mode not active]

Saw repeat WMF | Sound | 100

Octave 1|Semitone | Detune |Ke[Osc1 1]

-1 | +07 | +00 | +100%

User’s Manual MicroWave II • MicroWave XT • XTk

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 125 126

Keine Kommentare

Waldorf MicroWave XT Bedienungsanleitung Seite 26