Waldorf MicroWave XT Bedienungsanleitung PDF herunterladen (Seite 24)

☞ This is how you select a program:

1. Use the Page Dial 햴 to select the appropriated program. Turning the dial

clockwise increases the program number, turning the dial counterclockwise

decreases it.

2. The display shows the program type (Sound or Multi), the program number and the

name of the selected program (name may be different depending on the soundset

loaded):

Numerical Program Select

On the XTk, you can also select programs via the numeric keyboard section. Entering a two

digit or three number will select the corresponding program within the current bank. E.g. to

select program no.

014

, press 1 followed by 4. To select program no.

109

, press 109.

Bank Hold

The Bank Hold function gives further enhancement to the numerical program select. By

"freezing" the two leftmost digits of the program number, programs can be changed by

typing one single digit of the number. This feature is useful especially in live situations.

☞ This is how you use the Bank Hold function:

• Press the numerical keys 헁 section’s Select button 헂. The Hold LED above to the

Select button will go on.

• By pressing one of the numerical keys, you can select the last digit of the program

no. E.g. if program no.

A021

was selected before, you can switch from

A020

A029

by pressing the corresponding numerical key.

• To terminate the Bank Hold function, press the Select button 헂 again. The LED

above the button will go off again.

Switching Banks

By pressing the corresponding numeric key labeled A or B while holding the Select button

헂, you can easily switch from Bank A to B and vice versa. Before the bank switch is

performed, you have to enter a new 2 or 3 digit program number. This is just a precaution

to avoid "jumping" between programs.

Selecting Sound and Multi Mode

As mentioned before, the MicroWave II/XT/XTk can operate in Sound or Multi mode. When

the MicroWave II/XT/XTk is first powered up, Sound mode is selected.

☞ This is how you select the Multi mode:

1. Turn the third value dial 햾, labeled Mode, clockwise:

2. The display now shows the program number and the name of the selected Multi

program (name may be different depending on the soundset loaded):

Play Sound A001 | Mode |Main Vol.

Saw Repeat WMF | Sound | 100

User’s Manual MicroWave II • MicroWave XT • XTk

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 125 126

Kommentare zu diesen Handbüchern

Keine Kommentare

Waldorf MicroWave XT Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Synthesizer Waldorf MicroWave XT