Waldorf 2-Pole Bedienungsanleitung PDF herunterladen (Seite 24)

2-pole Parameters

2-pole Analog Filter User´s Manual 24

Rectify

Full-wave rectification is a type of audio

signal processing where one half of the

signal is inverted. Rectify is the dry /

wet control for blending the incoming

signal with the rectified signal. For your

information: The rectifier stage is di-

rectly located before the filter module

within 2-pole’s signal path.

[ You can use the rectifier as pitch-doubler when

using simple waveforms as input signal.

Type Selector LP / BP / HP

Selects the filter type:

• The LP Lowpass cuts frequen-

cies above the cutoff point.

• The BP Bandpass cuts fre-

quencies both below and above the cutoff point. As

a result, the sound character gets thinner.

• The HP Highpass cuts frequencies below the cutoff

point. It is useful to thin out a sound’s bass.

Cutoff

Cutoff controls the corner

frequency of the lowpass and

highpass filter types and the

center frequency of the band

pass. You can bring in more

movement to the sound by

modulating the cutoff fre-

quency via the LFO or the

envelope follower.

Resonance

Resonance is the emphasis around the

corner frequency. Use lower values to

give more brilliance to your sound. At

higher values, a sound gets the typical

filter character with a strong boost

around the cutoff frequency. When the

setting is raised above the center posi-

tion, the filter starts to self-oscillate producing a wave

ranging from sine to a square-like.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Keine Kommentare

Waldorf 2-Pole Bedienungsanleitung Seite 24